Redesign of the Layout of Aluminum Profile Production Facilities using the BLOCPLAN Algorithm Method and the CORELAP Algorithm at PT XYZ

Authors

  • Zimartani Universitas Indraprasta PGRI
  • Putri Zahra Universitas Indraprasta PGRI
  • Riri Cornellia Universitas Indraprasta PGRI
  • Oktaviani Universitas Indraprasta PGRI
  • Anggi Universitas Indraprasta PGRI

DOI:

https://doi.org/10.37010/nuc.v4i2.1348

Keywords:

ARC, BLOCPLAN, CORELAP, material handling, simulation computer, flexsim software

Abstract

PT XYZ is a private company engaged in the processing of aluminum metal which produces various types of aluminum profiles according to the needs or orders of customers located in North Bekasi. The position of the office with an extrusion load area of ??880 tons is in the same area, often causing noise from machines that interferes with the performance of office workers. Another reason is the placement of good facilities will support operator comfort, increase operator performance, and facilitate supervision so that the resulting product will be better in terms of quality. Production facility placements are less efficient because they have an initial layout efficiency value of 79% with an OMH (Material Handling Cost) value of Rp 41,701. Then the proposed layout was improved using the BLOCPLAN Algorithm and the CORELAP Algorithm. The results of the research using the BLOCPLAN Algorithm method obtained an efficiency value of 88% and an OMH value of Rp 21,205. While the results of research using the CORELAP Algorithm obtained an efficiency value of 86% with an OMH value of Rp 22,236. The alternative layout chosen is a layout that is processed using the BLOCPLAN Algorithm method because it produces an efficiency value of 88% and an OMH value of Rp 21,205.

References

Ambarwati, R. & Rumah, P. P. (2021). Manajemen Operasional dan Implementasi dalam Industri. Penerbit Pustaka Rumah C1nta.

Apsari, C. D. & Mahachandra, M. (2020). Perancangan Tata Letak Fasilitas Workshop Sewing Menggunakan Metode Blocplan Dan Corelap (Studi Kasus: Unit Cabin Maintanancept Garuda Maintenance Facility Aeroasia Tbk.). Industrial Engineering Online Journal, 9(2).

Awandani, H., Anugrah, I. L., Aldhiza, R. A., & Hasna, S. K. (2019). Perancangan Tata Letak Fasilitas pada UKM Fanri Collection Yogyakarta Menggunakan Software Flexsim 6.0. CIEHIS Prosiding, 1(1), 299-307.

Cahyono, B. (2005). Manajemen Operasi.

Daya, M. A., Sitania, F. D., & Profita, A. (2018). Perancangan Ulang (re-layout) tata letak fasilitas produksi dengan metode blocplan (studi kasus: ukm roti rizki, Bontang). Performa: Media Ilmiah Teknik Industri, 17(2).

Firdaus, K., Suryadhini, P. P. & Astuti, M. D. (2020). Perancangan Tata Letak Fasilitas Usulan Menggunakan Metode BLOCPLAN untuk Meminimasi Jarak Perpindahan Material. Semin. dan Konf. Nas. IDEC.

Gunanti, N. A., Ade Momon, S., Herwanto, D. & Arifin, J. (2021). Optimasi Tata Letak Fasilitas Menggunakan Algoritma Blocplan dan Corelap The Layout Optimization Using Blocplan and Corelap Algorithms. JIME (Journal of Industrial and Manufacture Engineering), 5, 2.

Purnomo, H. (2004). Perencanaan dan perancangan Fasilitas. Yogyakarta: Graha Ilmu.

Ristono, A. (2010). Perancangan Fasilitas. Yogyakarta: Graha Ilmu.

Sinulingga, S. (2008). Pengantar Teknik Industri. Yogyakarta: Graha Ilmu.

Downloads

Published

2023-11-15

How to Cite

Zimartani, Z., Zahra, P. ., Cornellia, R., Oktaviani, O., & Anggi, A. (2023). Redesign of the Layout of Aluminum Profile Production Facilities using the BLOCPLAN Algorithm Method and the CORELAP Algorithm at PT XYZ. NUCLEUS, 4(2), 60–70. https://doi.org/10.37010/nuc.v4i2.1348

Issue

Vol. 4 No. 2 (2023): NUCLEUS

Section

Artikel

License

Copyright (c) 2023 Zimartani, Putri Zahra, Riri Cornellia, Oktaviani, Anggi

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Abstract viewed = 591 times